Adhesives

You are here: Home Adhesives

Professional adhesives for f.e. manufacturers of cartonnage and backing for textile.

the Vechum industries adhesives Statos Fibro

Use
To adhere glassfibre, vinyl or textile wall covering.

Advice
Must be dry, clean, flat, absorbing, inflexible and pressure resistant. Pretreat too porous surfaces with diluted Fibro (max. 20%) and let dry.

Application
Stir well before use. Apply with a short haired mohair roller or brush.
Spreading rate: 200-300 gr/m² Glassfibre, dependant on the structure 125-200 gr/m² vinyl or textile wall covering, dependant on the structure.

Open time
20-30 min.

Cleaning
Immediatly with clear water.

Statos fibro tack+

Use
To adhere glassfibre, vinyl or textile wall covering, on difficult surfaces.

Advice
before application: Refer to our technical sheet.

Surface
Must be dry, clean, flat, absorbing, inflexible and pressure resistant. Pretreat too porous surfaces with diluted Fibro tack+ (max. 20%) and let dry.

Application
Stir well before use. Apply with a short haired mohair roller or brush.
Spreading rate: 200-300 gr/m² Glassfibre, dependant on the structure 125-200 gr/m² vinyl or textile wall covering, dependant on the structure.

Open time
20-30 min.

Cleaning
Immediatly with clear water.